Before You Begin

If you are using cloned machines, verify these machines have been properly sysprepped before deploying Conceal to avoid deployment issues. ConcealBrowse should be installed after the new clone is created in all cases. 

Procedure

1. In your dashboard navigate to https://dashboard.conceal.io if necessary.
2. In the upper right-hand corner select DOWNLOAD EXTENSION
3. This will bring up the Desktop Installers for Windows and Mac. Click to download the appropriate installer. You will see options for Generic and Customer installers:
   - Custom - This has the CompanyID and SiteID already embedded. The CompanyID and SiteID are required for authentication for deployment. This is recommended unless your deployment method requires you to insert these values elsewhere.
   -  Generic - Does not have the CompanyID and Site included and requires you to add those during the deployment process.
   

Host URLs for Non-customized Windows Installers

Note: These installers do NOT have the CompanyID and SiteID already embedded, so entering those during deployment would be a necessary step.

• Windows 64 bit - https://conceal-browse.conceal.io/installer/latest/ConcealInstaller.Windows_x64.msi
• Windows ARM - https://conceal-browse.conceal.io/installer/latest/ConcealInstaller.Windows_arm64.msi
• Windows 32 bit - https://conceal-browse.conceal.io/installer/latest/ConcealInstaller.Windows_x86.msi

You can always see what version of the MSI is installed on your Windows device by following the steps below:

• On a device where Conceal is installed go to Add/Remove programs
• Find and select ConcealBrowse. It should say a version number. (Ex: 1.2.7)

*Never hesitate to contact your Customer Success Manager for any questions or concerns. You may also open a support ticket at support.conceal.io by scrolling to the bottom and clicking Submit a request.